3) Try to force restart your dead phone Press and hold the Power button for 8 – 10 seconds. OR, Press the Power + Volume down (or up) button for 8 – 10 seconds.
How do you bring a dead phone back to life?
The solutions below will guide you on how to revive a dead phone with a non-removable battery. Check/Change the Power Outlet. Try another Charger. Charge the Phone for A While. Inspect the Charging Port. Try Force Restarting Your Phone. Get a Battery Replacement. Take Your Phone to the Official Service Centre.
How do I fix my phone if it wont boot?
Steps to Try When Your Android Won’t Boot Soft Reset. Your device might need a soft reset. Pull the Battery (if possible) Check for Stuck Buttons. Remove Connected Hardware. Ensure Device Has Enough Power. Start in Safe Mode. Factory Hard Reset. Repair.
How do I revive a dead android battery?
Instead, plug the phone into the proper charger and allow the device to charge for 48 hours. After the device has charged for 48-hours, turn the device on and check the battery power level. If successful, this method will have revived your previously dead battery allowing it to hold a charge again.
How do I force Android to boot?
Perform a Hard Restart (or Hard Reboot) It’s like holding the power button down on your computer. To give this a go, press and hold the power button for at least 20 seconds. If Android isn’t responding, this will (usually) force your device to reboot manually.
Why is my Android stuck on boot screen?
Sometimes, an android phone stuck on the boot screen might just have a low battery. If the battery of a phone is low enough, the phone won’t boot and will be stuck in the boot screen. Plug the phone in and let it get some power before you start the phone.
What is a boot loop?
Boot loops are the result of system files not knowing how to function during the initial start-up phase and can be caused by a variety of things, from downloading new apps to accidentally changing system files.
How do you fix a dead phone that won’t charge?
My phone died and now won’t power on or charge. Here’s how to fix it. Pull the battery. Check the outlet. Try a different outlet. Try using a computer or car charger. Keep charging it. You might need a new battery. Try a different charger. Replace the device.
How do you make a dead battery work again?
The following are seven unconventional ways to revive a dead car battery: Use Epsom Salt Solution. The Hard Hand Cranking Method. The Chainsaw Method. Use Aspirin Solution. The 18-Volt Drill Battery Method. Use Distilled Water. The Hot Ash Method.
Why is my phone dead and not charging?
Check the charging port for water damage or corrosion. Check the charging port for bent or broken pins and lint. for 5-10 seconds. If the device powers on, but doesn’t hold a charge, power cycle the device then charge fully and re-test.
Why did my Android phone screen go black?
The screen’s LCD connectors may be loose. There is a critical system error. You may have installed incompatible apps. The phone may have been overcharging for a long period of time.
Why is my android phone touch screen not working?
Way 1: Try to restart your Android device Hold the Power button and Volume Down button at the same time for a while until the touch screen becomes black. After 1 minute or so, please restart your Android device again. In many cases, the touch screen will return to normal state after you reboot the Android device.
What is a force reboot?
Force restarting your device will deliberately cut off the power from your phone’s battery to its hardware. This will cause your phone to lose power and shut down. It’s very common to find articles online that like to sell force restarting as a “better way” to restart your phone.
Can a boot loop fix itself?
Unfortunately, a system update leading to boot-looping may only be symptomatic of an underlying problem with your smartphone, not necessarily the cause in and of itself. In most cases, a boot-looping device is best remedied by simply getting a new phone.
How do I fix a stuck Android logo?
Force Restart Your Android Device The first simple solution to try when faced with this problem is a soft reset of the device. To do that, press and hold the Power button along with the Volume down button until the screen goes black. Now press and hold the Power button to start your device.
What causes reboot loop?
The Windows boot loop problem is often the result of a device driver, a bad system component or hardware such as the hard disk that causes a Windows system to spontaneously reboot in the middle of the boot process. The result is a machine that can never boot completely and is stuck in a reboot loop.
What is reboot to bootloader in Android?
REBOOT TO BOOTLOADER – Restarts the phone and boots directly into the Bootloader. BOOT TO DOWNLOAD MODE – Boots the phone directly to Download mode. POWER DOWN – Turns the phone off. FACTORY RESET – Factory resets the phone.
How do you reset an Android phone?
How to perform Factory Reset on Android smartphone? Tap Factory data reset. Tap Reset Device. Tap Erase Everything. Tap Settings. Tap Factory data reset. Tap Reset device.
How can I start my dead phone?
Charge your phone for at least 30 minutes. Press and hold the power button for a few seconds. On your screen, tap Restart , or press and hold the power button for about 30 seconds, until your phone restarts.
How long does a dead phone battery take to charge?
It should take about 3 hours for a full charge using the USB wall adapter. If it was charged to at least 50%, then turned off before storing it the phone should recover.