Lye pockets in soap can occur when a batch of soap separates. This separation can be due to overheating, insufficient mixing, or misbehavior caused by a fragrance or essential oil. The result is typically a separated layer of oil and glycerin and, possibly, a heat tunnel exhibiting lye pockets in soap.
Can you use soap with lye pockets?
Lye heavy recipes can be used to make laundry soap. In certain cases, the soap may have pockets of lye. That typically happens when the soap separates. In that case, I recommend throwing the batch out to be extra safe.
What causes lye heavy soap?
When soap is made with too much lye, it is called “lye-heavy.” This means there is extra, free floating lye that was not made into soap during the saponification process. Lye heavy soap can be irritating when applied to the skin and should not be used or sold. Lye heavy soap is often crumbly or dry feeling.
Are lye pockets safe?
In certain cases, the soap may have pockets of lye. That’s typically caused by separation. In that case, we recommend throwing the batch out to be extra safe. The lye pockets can irritate or burn the skin, or may do some odd things in the laundry.
How do you fix Ricing in soap?
Ricing. When an ingredient in the fragrance binds with some of the harder oil components in the recipe, it can form little rice-shaped lumps. Usually, you can stick blend the soap to smooth out the ricing. It will make it quite thick, so you may have to skip your planned design and get it into the mold with a spoon.
Can I Rebatch lye heavy soap?
Since lye is caustic, lye-heavy soap is also irritating to the skin. Instead of throwing away the lye-heavy soap, you can rebatch (hand-mill) it and make it into a more balanced, non-caustic mixture.
Why does my soap smell like lye?
Some things, however, change too much in a process called transmogrification. This means to change or alter greatly. Basically, lye can and will cause rot and degradation in some materials. Some, like beer, wine, some teas, and coffee, will change with a partial break down, causing a distinct smell.
How do you test soap for lye?
Place the pH strip on the wet soap to get a pH reading. If you don’t have pH strips on hand, the “zap test” is another method to test pH. Place the bar of soap onto the tip of your tongue. If you feel a slight zap feeling (similar to licking a battery), this means your soap is lye heavy.
What is the best lye concentration in soap making?
In general, the absolute highest ratio of water to lye is 1:1. This means there is equal parts lye and water in the mixture, or 50/50. At this ratio, the lye is still able to dissolve, but will be very concentrated and somewhat difficult to work with.
What do I do if my soap is lye heavy?
To correct a lye heavy batch, shred the soap as finely as possible, using gloves to protect your hands, and add to a slow cooker set on low. Add 1 tablespoon of distilled water and cover. Allow the soap to cook, stirring occasionally, until it has melted into a homogenous solution.
What is Lihiya or lye water?
Lye water (or Lihia sa tagalog) is a Food Enhancer Concentrate made from an alkaline strong liquid or a potassium carbonate solution.
How can you tell if lye is still good?
If your lye solution does not get very hot, it may be expired. Above, the potassium hydroxide lye solution using expired lye only reached 124 ° F. If you notice anything odd happening with your lye, don’t use it in cold process soap. Expired lye doesn’t saponify properly, meaning your soap may not reach trace.
How do you keep soap seized?
If it is a heavy seize and you can’t save it, you’ve got three options! Hot Process it – Dump it into a crockpot and hot process it. If it goes beyond the point of being able to stir it smooth and pour into a mold, you can hot process it.
What is rancid soap?
Rancid soap, whether liquid or bar, will smell “off” or musty. Rancid bars may have a wet-feeling, slick surface. The bar may be entirely orange or rust colored or may have just scattered rusty orange blotches and spots. These spots are often called “DOS” or “Dreaded Orange Spots” by soapers.
What can go wrong in soap making?
Let’s make some soap! Mistake #1 – Not Using Safety Equipment. Mistake #2 – Measuring Ingredients Incorrectly. Mistake #3 – Unsafe or Distracting Work Environment. Mistake #4 – Stop Overcomplicating Things. Mistake #6 – Using the Wrong Tools. Mistake #7 – Handling Lye Incorrectly. Get Making Some Soap!.
What pH is soap?
Majority of the soaps have a pH within the range of 9-10. Majority of the shampoos have a pH within the range of 6-7.
Why is my homemade soap slimy?
Too much fat: One of the key things to add into the soap to make sure everything is mixing well is fat, and when you add too much the soap becomes a slimy mess. You need to check the fat content of each ingredient and calculate how they will affect each other.
How soon can you Rebatch soap?
Rebatch soap does not require a 4-6 week cure time like cold process soap does. But, allowing the bars to cure for about 2 weeks will ensure extra moisture evaporates, creating a harder and longer lasting bar.
Can you smell lye?
Sodium hydroxide is also called caustic soda, lye, sodium hydroxide solid, and sodium hydrate. It has no odor and can be a solid or a liquid.
Why does my homemade soap smell rancid?
By over superfatting the extra excess oils are lingering around and sooner or later they may pop up as the dreaded orange spots. Since they are oil and not soap they will make your bar of soaps not smell as fresh as when you first made them as they are going rancid.
Why does soap smell bad?
The most common natural scent for bar soap is essential oil. Another name for essential oil is “volatile oil.” “Volatile” means that it has the tendency to vaporize. Essential oils are distilled in a similar way to alcohol because they vaporize at a lower temperature than water.